Vaporesso OSMALL 2 User Manual page 3

FIGURE
USER INSTRUCTIONS
1. Install & Replace the Pod
Pull out the pod from the battery and install the new one.
*If it's the first time using the device, please tear off the
sticker of the pre-installed pod.
2. Fill the E-liquid(Refer to FIGURE)
Pull out the silicon plug then squeeze the e-liquid
through the filling slot. After filling, put the silicon plug
back and make sure it's shut firmly.
*If it's the first time filling the e-liquid, please wait 5
minutes for the coil to prime.
3. Start Vaping
The device is draw-activated. Inhale through the mouthpiece
and exhale to start vaping.
4. Charging
Please use the in-box Type-C cable to charge the device.
The LED indicator will stay on white while charging and
shut off while fully charged.