Connection Board - BorMann PRO BCG1601 User Manual

EN
Sketch I
Assembly Sketch of A Machine and Its Support Frame
Sketch II
3

Connection board

1. Press the junction plate of the support frame to the top of the
2. Use a HEX wrench to turn the screws which you got from
Step 1 into the thread bushing,please make sure the machine and
the support frame have been well connected without any wobble.
Step 1: Please look at Sketch I, they are instructions to tell you how to as-
semble a grinder and its support frame. For disassembly need, please do
it in an opposite way.
Step 2 Please look at Sketch II, they are instructions to tell you how to
adjust the height of the handle.
WWW.BORMANNTOOLS.COM
thread bushing according to four holes
1. Turn the screw outward to loosen the inner tube, no
need for completely out
2. Adjust the handle up and down to a proper height
3. Turn the screw inward until the handle is fixed.