Advertisement
Available languages
Available languages
EN
Consideration
•
Please keep the workplace clean and bright;
•
Please keep the support frame away from the high temperature source, and flammable, explosive, corrosive liquids and gases;
•
Please protect the support frame from damage by external force or sharp objects, and pay attention to prevent falling damage;
•
Please do not work until the grinder and support frame are well connected;
•
Please don't keep the support frame exposed to rain and humidity for a long time;
•
This support frame is only used for BCG1600 grinder. Please don't use for other brands.
•
Please keep eyes on abrasion of the universal wheel and bearing, and replace them in time;
•
Please put idle support frame outside the reach of children, and don't let someone unfamiliar with the support frame or who doesn't know the instruc-
tions operate the support frame.
•
Please send your support frame to professional maintenance personnel,and must use the same spare parts for replacement;
•
Please keep the handles clean, dry and oil-free.
Spare Part List
Step 1
Split the thread bushing and screw
2
Operating Instructions
1. Switch box
2. Shelf for hanging wire
3. Suction pipe buckle
4. Bearing Wheel
5. Junction plate
6. Locking screw
7. Rubber handle
8. 4' universal wheel
Step 2
Use the Hex wrench to screw the thread
bushing onto the exposed heads of four
screws on your grinder
WWW.BORMANNTOOLS.COM
Where to install the machine
Advertisement
