CPI EuroMix Silo Operating Instructions Manual page 3

INTRODUCTION
This quick guide will show you how to connect,
start up and use the mortar mixer that comes
with your EuroMix silo.
Your silo will be set-up and checked by the
EuroMix technician before being handed over
to you for use. However, there are a few simple
things you can do to make sure the silo gives you
easy and trouble free mixing.
The most important thing you can do to help
keep the machine working is to always carry
out your daily and weekly clean. The cleaning
procedure is shown in this guide in detail, but if
you need any help or have any questions please
call your local plant.
During the winter months or if frost is at all likely,
please follow the cold weather working guide.
It is important that you protect the control panel
from frost damage as this will also prevent any
downtime from damaged equipment.
There is a fault diagnosis flowchart at the back of
the guide which you should follow to resolve any
issues with the mixer.
H&S DISCLAIMER
Only trained operatives should operate this
equipment. The equipment requires to be
stripped and cleaned, and it is EXTREMELY
IMPORTANT that the machinery is
disconnected from the mains supply by fully
removing the supply plug before carrying out
any work on the machine.
It is the customers responsibility to ensure that
all staff operating a EuroMix Silo Station are
fully trained.
CPI EuroMix are happy to carry out training
free of charge, simply contact your local CPI
office to book.
3