NETGEAR WAX630E User Manual page 79

Insight managed wifi 6e axe7800 tri-band multi-gig access point
Hide thumbs Also See for WAX630E:
Table of Contents

Advertisement

Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX630E
• If inter-VLAN routing is disabled in the network that the access point is connected
to, the following applies:
-
WiFi clients that are connected to different VLANs on the same WiFi network (that
is, the WiFi clients use different passphrases to connect to the same WiFi network)
cannot communicate with each other and remain isolated.
-
WiFi clients that are connected to the same VLAN on different WiFi networks can
communicate with each other.
• Multi PSK and the following features are mutually exclusive:
-
Captive portal (see Set Up and Manage a Captive Portal on page 99)
-
NAT mode (see Set NAT mode or Bridge mode for addressing and traffic on
page 203)
-
Client isolation (see Enable or disable client isolation for a WiFi network on page
204)
To set up Multi PSK for a WiFi network:
1. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 44.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 26.
The Dashboard page displays.
4. Select Management > Configuration > Wireless > Basic.
The page that displays lets you select an SSID.
5. Click the > button to the left of the SSID.
The settings for the selected SSID display.
Manage the Basic WiFi Features
for a WiFi network
79
User Manual

Advertisement

Table of Contents
loading

Table of Contents