Eco Operation - Hitachi PH Series Operation Manual

ECO OPERATION

■ Energy saving operation by changing set temperature and by limiting the maximum power consumption value.
NOTE
In case the power consumption is already low, ECO operation will not reduce the power consumption.
●
By pressing (POWERFUL) button, ECO operation is cancelled.
●
After auto restart, ECO operation is cancelled and previous operation mode shall start.
●
RAS/RAC-PH30HLT (1-16).indd 13 RAS/RAC-PH30HLT (1-16).indd 13
By pressing the (ECO) button during Heating, Automatic
Dehumidifying or Cooling operation, the air conditioner performs
the "ECO" operation.
Press (ECO) button during operation.
" " is displayed on the LCD.
●
Energy saving operation will start by changing the set
●
temperature higher or lower and saving operation power
consumption.
Press (START/STOP) button.
Press (ECO) button again.
●
" " disappears from the LCD.
●
– 13 –