Wiring A Music Keg To Kenwood Stereos - Kenwood KHD-C710 Music Keg User Manual

Wiring a Kenwood Music Keg to Kenwood car stereos
1. Turn off the car and the stereo.
2. Gain access to the rear portion of your car stereo Kenwood
stereo.
Important note: Depending on your car, the following step may involve
!
removing parts of the dashboard. If you do not have experience
installing car audio equipment, we recommend you seek the assistance
of a professional car audio installer.
3. Using the long (6.0 meter) Music Keg connector cable, plug the
appropriate end into the changer control terminal on the rear of
the Kenwood car stereo.
Page 14
Kenwood Music Keg User Manual
Copyright 2002 Kenwood USA Corporation & PhatNoise Inc.