MADER MQ170GS Manual page 93

7. Front wheel
Move the power tillers on road by the front wheel; lift the handlebars up the ground the
front wheel.
When the tiller is used in the field, move the wheel up by replacing the lock pin.
(1) When used in the field
(2) LOCK PIN
(3) When moved on road
8. Handling tips
Adjust the handlebar height to a comfortable position (waist height for normal tilling).
Should the machine jerk forward while tilling. Press down the handlebars. If the
machine will not move forward, move the handlebars from side to side.
Turn:
The proper method of negotiating a turn during a tilling operation is to lower the
handlebars to bring the gravity centre toward the rear and then make the turn this will
permit a turn to be made with relative ease.
(1)
(2)
(3)
20