Download Print this page

C-Dax MULTI BOOM 1018 Instruction Leaflet

Advertisement

Quick Links

AN IMPORTANT MESSAGE FOR OWNERS & OPERATORS OF C-Dax ATTACHMENTS AND ACCESSORIES
Be warned of the dangers of loading your ATV or other vehicle in excess of its carrying capacity.
It is important to understand that any loads or attachments whether fastened to or placed on a vehicle or ATV
will alter the stability or handling characteristics of that vehicle or ATV.
Spray tanks or other equipment must be filled only to a level where the gross weight is within the load limit of
Safety is a primary concern in the design, manufacture, sale, and use of spray tanks and other equipment.
As manufacturers of spray tanks and other equipment we want to confirm to you, our customers, our concern
for safety. We take this opportunity to remind you about the simple, basic and common sense rules of safety
when using spray tanks and other equipment. Failure to follow these rules can result in severe injury or
It is essential that everyone involved in the assembly, operation, transport, maintenance and storage of this
equipment be aware, concerned, prudent and properly trained in safety.
This also applies to equipment that is loaned or rented to someone who has not read the owner's manual
NEVER EXCEED THE LOAD LIMIT CAPACITY OF THE ATV OR OTHER VEHICLE.
PLEASE NOTE THAT FILLING THE SPRAY TANK OR OTHER EQUIPMENT COMPLETELY AND
OR THE ATTACHMENT OF ADDITIONAL EQUIPMENT TO THE ATV MAY EXCEED THE ATV'S
MAXIMUM LOAD CAPACITY, AND ADVERSELY AFFECT THE STABILITY OR THE ATV OR
OTHER VEHICLE.
CARGO SHOULD BE PROPERLY DISTRIBUTED AND SECURELY ATTACHED.
REDUCE SPEED WHEN CARRYING CARGO OR PULLING A TRAILER OR TRAILED
APPLICATION EQUIPMENT AND ALLOW GREATER DISTANCE FOR BRAKING.
NEVER ALLOW ANYONE TO RIDE ON YOUR SPRAYER OR OTHER EQUIPMENT.
ALWAYS FOLLOW THE INSTRUCTIONS IN THE OWNER'S VEHICLE MANUAL FOR CARRYING
CARGO OR PULLING A TRAILER.
PROPER MAINTENANCE IN LINE WITH MANUFACTURER'S RECOMMENDED MAINTENANCE
PROCEDURES IS ESSENTIAL.
BEFORE APPLYING CHEMICALS, READ THE LABEL OF THE CHEMICAL MANUFACTURER OR
SUPPLIER FOR PERSONAL PROTECTIVE EQUIPMENT AND OPERATE AS RECOMMENDED.
THE SAFETY OF ALL CHEMICALS USED IN AGRICULTURE IS UNDER THE JURISDICTION OF
A GOVERNMENT AGENCY, IE N.Z. MINISTRY FOR THE ENVIRONMENT; USA
ENVIRONMENTAL PROTECTION AGENCY. FURTHER LOCAL GOVERNMENT OR STATE
LAWS MAY APPLY.
MULTI BOOM 1018
INSTRUCTION LEAFLET
(Pt.No.2400-0720 Issue 7, Jan 2016)
SAFETY PRECAUTIONS
the ATV or other vehicle.
death to operators and bystanders.
and is not familiar with the operation of application equipment.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the MULTI BOOM 1018 and is the answer not in the manual?

Questions and answers

Summary of Contents for C-Dax MULTI BOOM 1018

  • Page 1 (Pt.No.2400-0720 Issue 7, Jan 2016) SAFETY PRECAUTIONS AN IMPORTANT MESSAGE FOR OWNERS & OPERATORS OF C-Dax ATTACHMENTS AND ACCESSORIES Be warned of the dangers of loading your ATV or other vehicle in excess of its carrying capacity. It is important to understand that any loads or attachments whether fastened to or placed on a vehicle or ATV will alter the stability or handling characteristics of that vehicle or ATV.
  • Page 2: Warranty And Liability

    U.K.) subject to the terms set out below. C-Dax will at its option repair or replace the defective equipment (or part of the equipment) or notify the retailer of the equipment to refund the purchase price for such defective equipment to you in the event of a breach of this warranty, subject to the terms set out below.
  • Page 3 You agree that the transactions entered into between you and the retailer (and C-Dax) are for the purposes of trade and that, having regard to all relevant circumstances of the transactions, it is fair and reasonable that the provisions of the Consumer Guarantees Act 1993 (NZ) do not apply to those transactions to the fullest extent permitted by law.
  • Page 4: Installation

    DESCRIPTION The Multiboom is a compact, lightweight, rugged spray boom suitable for spraying where tall brush weeds or other obstacles may damage a wider boom. The boom is only 1.5 metres wide but has an effective spray width of up to 4.5 metres. The boom is divided into five spraying sections each controlled by a shut-off valve located on each of the nozzle bodies.
  • Page 5: Spare Parts

    CALIBRATION 4.5M Effective Width To calibrate the Multiboom, the outer nozzles must be adjusted so that their effective spray width is 1.5M each. This makes the effective width of the boom 4.5M. Because the outer nozzles are covering an area three times as wide as each nozzle in the center section, they must be selected to produce three times the flow of each center nozzle at the same pressure.
  • Page 8 INNER NOZZLE BODY PARTS Item No. QTY. e9 part no e9 description 5300-1900 Nozzle Body-DCV-QCx22x10-Incl O'Ring-Less Cap 3280-0634 Fastener-Self Tap-Screw-Pan-6Gx3/4"-Pozi-ZP 3400-5400 Filter-Nozzle Tip-50 Mesh-Plastic 5300-XXXX Nozzle-Tip-SPECIFY TYPE WHEN ORDERING 1600-6000 Cap-Nozzle-Fan-QC-Red-Incl Gasket 3700-9250 Gasket-Washer-Nozzle Tip Sealing-10x19x3.5mm-Rubber...
  • Page 9 OUTER NOZZLE BODY PARTS Item No. QTY. e9 part no e9 description 5300-1600 Nozzle Body-DCV-3/8BSPMx22x10-Incl O'Ring-Less Cap 5300-2600 Nozzle Body-Swivel-Single-3/8BSPFxQC-Nylon 3400-5400 Filter-Nozzle Tip-50 Mesh-Plastic 1600-6000 Cap-Nozzle-Fan-QC-Red-Incl Gasket 5300-XXXX Nozzle-Tip-SPECIFY TYPE WHEN ORDERING 8900-5300 Valve-Nozzle Body-Shut Off-Incl DCV 3280-0634 Fastener-Self Tap-Screw-Pan-6Gx3/4"-Pozi-ZP...