1. Manuals
  2. Brands
  3. C-Dax Manuals
  4. Measuring Instruments
  5. Pasture Meter
  6. Assembly instructions

C-Dax Pasture Meter Assembly Instructions

Hide thumbs Also See for Pasture Meter:
1
2
3
4

Advertisement

Table of Contents

Pasture Meter Assembly Instructions (Autolift Version)
(Leaflet Pt.No.2400-1205 Issue 3, dated 01 November 2010)
The C-Dax pasture meter requires some assembly. This leaflet details the procedure for doing such assembly.
Unpack the contents of the pasture meter carton. While not completely necessary, assembly is easier if done on a
tabletop. Carefully lift the main pasture meter frame and all other parts onto a tabletop.
Lay the parts for each side of the unit on
•
the table either side of the frame as shown.

DESCRIPTION

ASSEMBLY

1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pasture Meter and is the answer not in the manual?

Questions and answers

Related Manuals for C-Dax Pasture Meter

Summary of Contents for C-Dax Pasture Meter

  • Page 1 The C-Dax pasture meter requires some assembly. This leaflet details the procedure for doing such assembly. ASSEMBLY Unpack the contents of the pasture meter carton. While not completely necessary, assembly is easier if done on a tabletop. Carefully lift the main pasture meter frame and all other parts onto a tabletop.
  • Page 2 5 x 50mm Split Pin Rotate the pin to line up the split pin holes Attach the stub arm pivots to each side of • the frame. Mount these to the frame using the 132mm Pin through the stub arm pivot and insert the 5x50mm split pin through the Attach strut to axle bush.
  • Page 3 3. Travel to the intended paddock with the pasture meter in the raised position. Lower the unit by pressing the switch to ‘lower’. This will lower the pasture meter to its measuring position (note: you do not need to hold the switch down).
  • Page 4 EXPLODED PARTS DIAGRAM...

Table of Contents