Rotary Encoder Volume Control with Illuminated Search Key Touch-n-GO Flip Down Detachable Face Controller for Optional TV Tuner Module Capability to Read CD TEXT Data from Clarion Compatible CD Changer Z-Enhancer with 3 Adjustment Modes CeNET with Balanced Audio Line Transmission and Dynamic Noise Canceling ®...
ENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTER- FERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR SUB-CHAPTER J APPLICABLE AT DATE OF MANUFACTURE. CLARION CO., LTD. 50 KAMITODA, TODA-SHI, SAITAMA-KEN, JAPAN. MANUFACTURED: SERIAL No. 286- Clarion Co.,Ltd.
3. CONTROLS / LES COMMANDES / CONTROLES Source unit / Appareil pilote / Unidad fuente OPEN With the FLIP DOWN PANEL opened / Ouverture du PANNEAU RABATTABLE Apertura del PANEL ABATIBLE Display / Afficheur / Visualizador Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter. Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
5. DCP The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car. Removing the DCP 1.
6. REMOTE CONTROL Remote control unit Inserting the Batteries 1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2. Insert the AA (UM-3/1.5V) batteries that came with the remote control unit facing in the di- rections shown in the figure, then close the rear cover.
Functions of Remote Control Unit Buttons Mode Radio Button , FUNC Turns power on and off. When pressed and held for 1 second: Turns power off. Switches among radio, CD, CD changer, MD changer and TV. - BAND Switches reception DISC UP band.
7. OPERATIONS Basic Operations CAUTION Be sure to lower the volume before switch- ing off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and dam- age the unit.
When you have entered a title in a CD, it ap- pears in the sub display. If you have not en- tered a title, “NO-TTL” appears in the title dis- play instead. For information on how to enter a title, refer to the subsection “Entering titles” in the “Other Handy Functions”.
Basic Operations Adjusting the Z-enhancer 1. Press Z-EHCR button 8 and select the Z- enhancer mode (1 to 3) to adjust. 2. Press A-M button $ and select “Z-EHCR”. 3. Turning the Rotary knob & clockwise adjusts in the + direction; turning it counterclockwise adjusts in the –...
Manual tuning There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the fre- quency changes one step at a time. In quick tun- ing mode, you can quickly tune the desired fre- quency.
CD Operations Loading a CD 1. Press OPEN button 1 to access the CD in- sertion slot behind the FLIP DOWN PANEL. 2. Insert a CD into the center of the insertion slot with the label side facing up. The CD plays automatically after loading.
CD Operations Fast-forward/fast-backward Fast-forward Press and hold the right side of SEARCH button % for 1 second or longer. Fast-backward Press and hold the left side of SEARCH button % for 1 second or longer. Top function The top function resets the CD player to the first track of the disc.
This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car. This function is not compatible with all cellular telephones. Contact your local authorized Clarion dealer for information on proper installation and compatibility.
8. OPERATIONS OF ACCESSORIES CD Changer Operations CD changer functions When an optional CD changer is connected through the CeNET cable, this unit controls all the CD changer functions. This unit can control a total of 2 changers (MD and/or CD). Press FNC button 3 and select the CD changer mode to star t play.
CD Changer Operations Top function The top function plays from the first track (track No. 1) of the disc. When playing a disc 1 to 6 Press the Direct button 9 (1 to 6) with the same number as the CD playing. When playing a disc 7 to 12 (only when a 12 disc CD changer is used.) Press and hold for 1 second or longer the Direct...
MD Changer Operations MD changer functions When an optional MD changer is connected through the CeNET cable, this unit controls all the MD changer functions. This unit can control a total of 2 changers (MD and/or CD). Press FNC button 3 and select the MD changer mode to star t play.
MD Changer Operations Repeat play The repeat play continuously plays the current track. This function continues automatically until it is canceled. 1. Press RPT button 6. “RPT” lights in the dis- play and the current track is repeated. 2. To cancel the repeat play, press RPT button 6 again.
Page 19
Manual tuning There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In quick tuning mode, you can quickly tune the desired frequency. 1. Press BND button # and select the desired band (TV1 or TV2).
9. TROUBLESHOOTING Problem Power does not Fuse is blown. turn on. (No sound is produced.) Incorrect wiring. No sound output Power antenna lead is when operating shorted to ground or the unit with excessive current is required amplifiers or for remote-on the amplifiers power antenna or power antenna.
10. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. Error Display ERROR 2 A CD is caught inside the CD deck and is not ejected. ERROR 3 A CD cannot be played due to scratches, etc.
11. SPECIFICATIONS FM Tuner Frequency Range: 87.9 MHz to 107.9 MHz Usable Sensitivity: 11 dBf 50dB Quieting Sensitivity: 17 dBf Alternate Channel Selectivity: 75 dB Stereo Separation (1 kHz): 35 dB Frequency Response ( 3 dB): 30 Hz to 15 kHz AM Tuner Frequency Range: 530 kHz to 1710 kHz...