Download Print this page

How To Use - Sony XBA-1iP Operating Instructions

Made for ipod/iphone/ipad

Advertisement

How to use

Frequency response: 5 Hz – 25,000 Hz
Cord: 1.2 m (47
1
/
in) (Y-type)
4
Plug: Four-conductor gold-plated L-shaped stereo
mini plug for iPod with remote function
Mass: Approx. 3 g (0.11 oz) (without cord)
Microphone
Open circuit voltage level: – 42 dB (0 dB=1 V/Pa)
Supplied accessories
Hybrid silicone rubber earbuds: SS (red) (2), S (orange)
(2), M (green) (attached to the unit at the factory) (2),
L (light blue) (2) / Noise isolation earbuds: S (orange)
(2), M (green) (2), L (light blue) (2) / Cord adjuster
(winds cord up to 50 cm (19
Carrying pouch (1)
* IEC = International Electrotechnical Commission
** 150 mV input
Design and specifications are subject to change without
notice.
Optional replacement earbuds can be ordered from
your nearest authorized Sony retailer or www.sony.
com.
Center button
3
/
in)) (1) / Clip (1) /
4
Volume +*
Volume –
* There is a tactile dot beside Volume +.
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.
About noise isolation earbuds
Supplied noise isolation earbuds provide a snug fit for
effective attenuation of ambient noise.
Notes
 Prolonged use of snugly fitting earbuds may strain
your ears. If you experience discomfort, discontinue
use.
 The pressure-relieving urethane cushion is extremely
soft. If it breaks or detaches from the earbuds, it will
not take its correct position and the earbuds will lose
their noise isolation function.
 The urethane cushion may deteriorate over time. If
the pressure-relieving power is lost and the urethane
cushion hardens, the earbuds may lose their noise
isolation function.
 Do not wash the earbuds. Keep them dry, otherwise
they may deteriorate quickly.
Microphone

Advertisement

loading