Onboard Headers And Connectors - ASROCK ADLD4-P1 User Manual

2.2 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these
headers and connectors. Placing jumper caps over the headers and connectors will cause
permanent damage to the motherboard.
CPU Fan Connector
(4-pin CPU_FAN1)
(see p.5, No. 4)
M.2 Fan Connectors
(4-pin M2_FAN1)
(see p.5, No. 3)
(4-pin M2_FAN2)
(see p.5, No. 2)
10
FAN_SPEED_CONTROL
CPU_FAN_SPEED
FAN_VOLTAGE
GND
1 2 3 4
GND
FAN_VOLTAGE
FAN_SPEED
FAN_SPEED_CONTROL
This motherboard
provides a 4-Pin CPU fan
(Quiet Fan) connector. If
you plan to connect a 3-Pin
CPU fan cable, please con-
nect it to Pin 1-3.
This motherboard
provides two 4-Pin M.2 fan
connectors. If you plan to
connect a 3-Pin fan cable,
please connect it to Pin 1-3.