Advertisement
Quick Links
3-ZAHN DICKICHTMESSER
3 CUTTER BLADE
LAME 3 DENTS
DISCO A 3 DENTI
WARNING
READ INSTRUCTIONS CAREFULLY AND FOLLOW RULES FOR
SAFE OPERATION.
FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY.
ATTENTION
LISEZ ATTENTIVEMENT CE MANUEL ET APPLIQUEZ LES
RÈGLES DE SÉCURITÉ ET D'UTILISATION. TOUTE NÉGLIGENCE
A CET ÉGARD PEUT CAUSER DES ACCIDENTS GRAVES.
ACHTUNG
LESEN SIE DIE BEDIENUNGSANLEITUNG SORGFÄLTIG DURCH
UND BEFOLGEN SIE DIE SICHERHEITSBESTIMMUNGEN, WEIL
SONST DAS RISIKO SCHWERER VERLETZUNGEN BESTEHT.
ATTENZIONE
LEGGERE ATTENTAMENTE LE ISTRUZIONI E SEGUIRE LE
REGOLE PER OPERARE IN SICUREZZA.
LA MANCATA OSSERVANZA DI QUESTA AVVERTENZA
POTREBBE CAUSARE GRAVI LESIONI.
M35A
DANGER
DANGER
GEFAHR
PERICOLO
GB
F
D
I
Advertisement
Related Manuals for Echo M35A
Summary of Contents for Echo M35A
- Page 1 3 CUTTER BLADE LAME 3 DENTS 3-ZAHN DICKICHTMESSER DISCO A 3 DENTI M35A WARNING DANGER READ INSTRUCTIONS CAREFULLY AND FOLLOW RULES FOR SAFE OPERATION. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY. ATTENTION DANGER LISEZ ATTENTIVEMENT CE MANUEL ET APPLIQUEZ LES RÈGLES DE SÉCURITÉ...
- Page 2 Oprator’s manual Manuel d’utilisation 15 meters 15 mètres 15 metri Bedienungsanleitung Manuale d’istruzione • Operator’s manual must be read for proper and safe • Inspect blades before use. Check for sharpness. Dull operation. blades increase the risk of blade kick-back reactions. •...
- Page 3 • Do not raise the cutting attachment above knee height. • The sharpening of the blade is a specialized operation If raised higher, the cutting attachment will be more and should be refered to you local blade repair shop. • Store unit in a dry, dust free place, out of the reach of directly in line with your face.
- Page 4 Ç...
- Page 5 1. Blade 3. Hole for locking tool 1. Blade 2. Angle transmission 4. Retainer spring 2. Locking tool Insert locking tool into a hole located on the right side of CAUTION angle transmission while forcing retainer spring to the left Fasten output shaft using locking tool securely in side.
- Page 6 1. Locking tool 2. Blade Tighten the nut (turn counterclockwise) using a socket Offer the cover plate up to the bearing housing assembly wrench. and secure with the four bolts. CAUTION Wear gloves to reduce the risk of injury caused by unintentional contact with the blade.
- Page 7 Ç...
- Page 8 7-2 SUEHIROCHO 1-CHOME, OHME, TOKYO 198-8711, JAPAN PHONE: 81-428-32-6118. FAX: 81-428-32-6145. Printed in Japan X750-008790 0601B ES X750223-4300 © 2005...