Dyson Outsize User Manual page 2

In the box
Your machine will come with one or more of
these cleaner heads and dok types - not all
will be included.
Main body showing
the handle and bin
attached.
Vacuum cleaner
A rectangular
dock that
needs to be
fixed to a wall
with screws.
Wall dock Charger
The Dyson cordless Charges your vacuum
vacuum drops into with or without a dock.
the wall-mounted
The charger is a one
charging dock, ready
piece unit with the plug,
for your next clean.
connector end and
cable.
The narrow connector end at the top, this connects to the bin and the
Wand
wider end at the bottom that connects to the cleaner head or tool.
Some tools and accessories may not be included.
This tool has a
combination
of brush head
and crevice tool
together in one
unit. The brush
head slides down
the crevice tool
when needed.
Combination tool Crevice tool
Two tools in one – wide Engineered for precise
nozzle and brush, cleaning around
for quick switching tricky edges and into
between cleaning and hard-to-reach narrow
dusting tasks around spaces.
your home or car.
You can buy additional tools and accessories at www.dyson.com.au or www.dyson.co.nz
A plastic clip that
attaches to the wand
Wand clip Mini motorised tool
Clips to your vacuum's Motorised brush bar,
wand to hold tools. concentrated in a
smaller head to remove
stubborn dirt from
mattresses, upholstery
and stairs.
A brush bar located inside
the cleaner head and
a suction control slider
located on the front.
Digital Motorbar™ XL
cleaner head
De-tangling vanes
automatically clear
wrapped hair from the
brush bar as you clean.
A rectangular battery with an
slanted connector that slides into
the handle of the main body of
the machine.
Additional click-in battery
Not all models are supplied with
an additional click-in battery.
You can buy additional click-in
batteries at www.dyson.com.
A small cleaner head
with an angled body
housing the motor and
an electrical connector
to attach to the wand or
A long tool with
directly to the machine.
an angled end.
Hair screw tool
Anti-tangle conical
brush bar spirals hair
off and into the bin.
Motor-driven cleaning
for smaller spaces.
A short nozzle with stiff
bristles on the underside.
Stubborn dirt brush
Stiff nylon bristles
dislodge ground-in dirt
from coarse carpets,
high traffic areas and
car interiors.
A soft fluffy brush bar
housed within the
cleaner head. There is
an electrical connecter
end that can attach to
the end of the wand or
directly to the machine.
Laser Slim Fluffy TM
cleaner head
The Laser Slim
Fluffy TM cleaner head
makes invisible dust
visible on hard floors.
A wide, triangular
shaped nozzle.
Up-top adapter Fabric and
mattress tool
Bends and locks at
Removes dust, dirt
different angles. Fits
and allergens from
any compatible tool
mattresses and
for effective cleaning
upholstery.
in hard-to-reach high
areas of your home.
With an elbow
joint, fitted
between the bin
and the tool.
Low-reach adaptor
Bends to comfortably reach
down low. Engineered to
clean further under low
furniture by adjusting the
wand angle up to 90°.
A floor standing dock
with a round base and
a cylindrical support
with the support for
your machine at the
top. Slide the battery
section of your machine
into the dock where it
then connects to the
charging points.
Dyson Floor Dok
The Dyson vacuum drops
into the dock so it's easy
to charge and put away,
ready to grab and go
when you need it.
Pliable bristles and
felt bumper strip on a
narrow, tapered tool.
Soft dusting brush
Enclosed in a skirt of soft
nylon bristles for gentle,
vacuum-assisted dusting
of delicate objects and
surfaces.