Advertisement
UAG-XKxxx, UAG-XKPxxx and UAG-CX-XKPxxx
Configuration Examples
Notes:
1. All examples use the USP-104-B10 10.4" HMI panel.
2. The amount of modules at all examples relate to Uni-I/O modules. You can mix Uni-I/O modules
with Uni-I/O Wide modules,considering that 1 Uni-I/O Wide module equals 1½ Uni-I/O module.
Configuring for maximum I/Os
The figure below shows the greatest number of I/O modules that can be connected to a single
UniStream™ controller using Uni-I/O modules and 5 Local I/O Expansion adapters with power supplies.
Configurations with Short-range adapter, no Power Supply (UAG-XKxxxx).
If UAG-XKxxxx is the only adapter connected to the controller, the system can support up to 8 modules.
If a UAG-XKxxxx follows another adapter with an integrated power supply, the support capacity of that
powered module limits the number of Uni-I/Os that can be connected to the UAG-XKxxxx; in any event,
no more than 8 Uni-I/Os can follow a UAG-XKxxxx adapter.
This example combines all types of adapters:
Unitronics
®
UniStream
4
Advertisement
