Advertisement
Operating
Manual
Foot Control/ Bench Mount Kit (A37099, Optional)
1. Disconnect tool from air supply
2. Mount bracket to tool as shown
3. Remove air block from handle and store using second set of mounting holes.
4. Attach foot control connector using button head screw.
5. Mount bracket to top surface of tool using 2 socket head screws. Use smaller
holes in bracket.
6. Mount other leg of bracket to bench using larger holes.
7. Adjust angle of tool to desired position and tighten bolt between
Fig. 12a
Please Contact Your Sales Representative for more information
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
www.BAND-IT-IDEX.com
Page 18 of 19
PNEUMATIC TOOL
Fig. 12b
Document # P35087 Rev. I
BAND-IT-IDEX, Inc. 2021
A351, A355
© Copyright
All rights reserved
Advertisement
