Advertisement
Operating
Manual
Release water accumulated in filter on air regulator box:
1. Disconnect air pressure.
2. Place a small cup under the filter.
3. Push in the valve at the base of the filter.
Clean/replace filter element:
1. Disconnect air supply
2. Rotate filter up and unscrew clear plastic housing.
3. Unscrew filter element and clean/replace gold colored element.
4. Replacement (if necessary) must be a 5 micron filtering element,
available from BAND-IT (Part# A39987)
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Maintenance
Fig. 8
www.BAND-IT-IDEX.com
Page 12 of 19
A351, A355
PNEUMATIC TOOL
Air Filter
Water Release
Valve
Document # P35087 Rev. I
© Copyright
BAND-IT-IDEX, Inc. 2021
All rights reserved
Advertisement
