1_ Squeeze tab of battery covert
2_ At the same time pull cover out of remote°
3. insert battery as shown.
4. Close the battery cover_
CRADLE: The remote control
has a separate walt.mountable
storage cradle that can
be conveniently attached to
any wall using a screw,
oInsert 3V lithium battery CR2025 into the
° Incorrect battery usage may cause battery
fluid leakage andlor damage.
° When not using remote control for an ex-
tended period, remove the battery.
° Avoid dropping or damaging the remote
control° Keep remote control away from
direct sunlight or heaters.
• Operate the remote control facing the air
• Operate within 20 feel of the air cleaner.
° Any location where there is inverter light-
ing equipment or electronic
• When objects or furniture are located
between the remote and the air cleaner,
• When air cleaner unit is located in direct
sunlight, as sunlight may interfere with the
° in areas where fluorescent
flickering due to worn-out
Use the power button to turn
the power on and off° A short "beep" will
sound when the unlt turns on or off.
AUTO: When in AUTO mode, the air
cleaner will automatically sense the
amount of impurities in the air and adjust
the fan speed accordingly. When the
unit is first turned on it wilt default to
o UP: Use this button to switch from
automatic operation and increase the
• DOWN: Use this button to switch from
automatic operation and decrease the
TURBO: Use this button to switch from
automatic operation and begin the
maximum amount of room air cleaning
and air movement.