Kogan X2 Series User Manual page 20

Near Field Voice
Pairing Bluetooth Remote During Initial Setup
For the remote control supplied with your TV, please finish pairing with your Android TV
before using it for near field voice function. Follow the onscreen prompts to pair the remote
with the TV, holding the LEFT and HOME buttons simultaneously. Your remote's LED light
will flash while pairing, and the TV will display 'Remote control paired' when successful.
Skipping Setup
To skip this step during the first-time setup, select 'Skip' in the bottom right corner of the
screen. You can return to this later if desired.
Returning to Bluetooth Pairing Later
To return to the Bluetooth pairing screen and pair your remote control, select 'Settings' from
the home screen and navigate down to 'Remotes & Accessories'. From this submenu, select
'Add Accessory' and repeat the steps above to put the remote control into Bluetooth pairing
mode (holding the LEFT and HOME buttons simultaneously).
After selecting 'Add Accessory', the TV will scan for nearby available devices. Your remote's
LED light will flash while pairing, and the TV will display 'Remote control paired' when
successful. This will allow you to use voice commands with your remote via the Near Field
Voice function.
20
1. Near Field Microphone
Microphone for Near Field Voice function. It is best to keep
your mouth within 5 cm of the microphone while using the
near field voice function for optimal results.
2. Mic Button of Near Field Voice Function
Press to start using the Near Field Voice function. For the
function to work, ensure you have connected your TV to the
network, paired the Bluetooth remote control with your TV
and be signed into your Google account.
If you have turned your TV off using the Near Field Voice
function, you can turn it back on using the function. If you
have turned your TV off manually, the Near Field Voice will
not be active.