Install Remote Control Batteries
Place two AAA size batteries in the remote control's
battery compartment, making sure to match the polarity
markings inside the compartment.
Installation of Restraining Brackets
To prevent the TV from toppling over by some sudden
circumstances (such as earthquake, shock, climbing by a child,
etc.), we recommend installing the restraining brackets before
using the TV. This is recommended when using with the base
stands, and is not required if wall
1.
Take out the accessories supplied with the TV from the
package (pic 2).
• TV Restraining Bracket: 2 PCS
• Rope: 2 PCS
2.
Remove the TV restraining screws from two top wall-
mount holes on the TV rear cabinet with a screwdriver
(pic 1).
3.
Use the TV restraining screws to fasten the TV
restraining brackets on the TV rear cabinet (pic 2).
4.
Fix wall restraining brackets (not supplied) on the wall
(pic 3).
5.
Connect the TV restraining brackets and wall restraining
brackets tightly with rope (pic 2 & 3).
Notes:
• Ensure you've installed the TV near the wall so that it
cannot fall backwards.
• Wall restraining brackets (2pcs) not supplied.
Additional rope may also be required.
14