ASCM 12
Fitting
Fitting the motor housing
2
1
1. Insert the nut (1).
2. Insert the toggle switch (2).
3. Insert the motor and the electronics into the motor housing in the correct position.
Observe the locks (3).
4. Insert the LED (4) and lay the cables.
5. Insert the plug (5).
C-SC_CSSM
Version 1.0
2015-10-08
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
3
3
.
4
5
Tools:
- Assembly aid
5 / 9