Four-channel high-power system (APX4360)
In this application, the APX4360 is used as a four-channel amplifier to drive four
speakers in stereo with fader control.
Front left
Full range
Front right
Full range
Four speakers in stereo—full range
•
Set crossover mode switch to OFF
Four speakers in stereo—filtered
If the front or rear speakers are smaller than 5.25", you may decide to enable the
crossover. The following apply to the front or rear channels with the small speakers.
•
Set crossover mode switch to HP
•
Set crossover frequency to ~200Hz for 4-inch speakers
APX/DPX Amplifiers
APX-DPXOwnersManual.pmd
-
LEFT
+
-
+
RIGHT
FRONT
REAR
-
+
-
+
2
2
BRIDGED (4 )
2 Ω
2 Ω
~350Hz for 3.5-inch speakers
17
REM
GND
+
12V
FUSES
Rear right
Full range
Rear left
Full range
2006-03-14, 21:47
17