Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eddylight EDD-GL-BFLAT9
Summary of Contents for Eddylight EDD-GL-BFLAT9
- Page 1 5 in 1 DMX Flat LED Light...
-
Page 2: Important Safety Instructions
• Thank you for purchasing our EDD-GL-BFLAT9/EDD-GL-FLAT9 6-in-1 LED light. Please read these instructions carefully before operating to avoid any possible damage and accidents caused by misuse. • The Cube light has a hydrodynamic aluminum shell. Six integrated, highbrightness LED lights (containing red, green, blue, amber, white+UV) are used to create a wide spectrum of colors. - Page 3 , To avoid unnecessary wear and to improve the unifs lifespan, unplug the unit when not in use for extended periods of time. • Assembly and installation of the device must be carried out by a specialist familiar with the hazards and the relevant regulations.
-
Page 4: Features And Specifications
• For this, install the effect light with the assembly bore of the mounting bracket to the traverse clamp and that in turn to the traverse system. Use only assembly material suitable for the type of assembly and for bearing the effect light load. -
Page 5: Packing List
• Unit dimensions: 8.07" x 7.87" x 4.76" • Black housing • Unit weight: 7.28 Lbs. Packing List Included in delivery: 1. EDD-GL-BFLAT9/EDD-GL-FLAT9 5-in-1 LED light 2. Power cable 3. Remote control 1. Antenna 2. Battery power switch 3. Main power switch 4. -
Page 6: Operation
Charging There are two switches on the rear panel of the light. The black switch is for power and the red switch is for battery operation. When charging the light, please switch the power switch to “off” and the battery button to “on”. If the battery switch is not set to the on position the battery will not charge. - Page 7 Set: The settings menu will allow you to adjust the following options: • DMX channel: switch between 6 channel and 10 channel. • 2.4G wireless: turn function on or off. Must be off for wired DMX controller operation. • Infrared: turn function on or off. •...
-
Page 8: Dmx Controller Function
DMX Controller Function When using a DMX controller, use the chart below to reference each channePs function. 6 Channel Mode Function Value Description Red Dimmer 0-255 Green Dimmer 0-255 Blue Dimmer 0-255 Adjust individual LED brightness White Dimmer 0-255 Amber Dimmer 0-255 Purple Dimmer 0-255... -
Page 9: Remote Control Operation
Remote Control Operation 1. Dimming/Speed/Up-Down: Adjusts the brightness of the fixture when manually adjusting colors. In Auto Mode, the buttons are used to adjust the speed of the selected program. In color mixing mode, they serve as up and down buttons. 2. - Page 11 EDD-GL-BFLAT9 EDD-GL-FLAT9 DOWNLOAD INSTRUCTIONS...
Need help?
Do you have a question about the EDD-GL-BFLAT9 and is the answer not in the manual?
Questions and answers