Subscribe to Our Youtube Channel
Related Manuals for Eddylight EDD-GL-BFLAT9
Summary of Contents for Eddylight EDD-GL-BFLAT9
- Page 1 5-in-1 Wireless LED Light Standard & Battery Operated Models EDD-GL-BFLAT9 & EDD-GL-FLAT9 USER MANUAL...
- Page 2 1. Introduction Thank you for purchasing our 5-in-1 Wireless LED light. Please read these instructions carefully before operating to avoid any possible damage and accidents caused by misuse. The 5-in-1 Wireless LED light has a durable steel enclosure. Five colors of high-brightness LED lights (red, blue, green, amber and white) are used to create a wide spectrum of colors.
- Page 3 3. Dimensions and Specifications Multi-voltage Operation: AC 100V/60Hz - 240V/50Hz Maximum Power Usage: 135 W LED Angle: 30 (+/-5) degrees Lamp Life: 6,000-10,000 hours Lamp Power: 9 pc x 15 W 5-in-1 LED’s Wireless Connectivity Range: ~440’ Packing Size: 240 x 130 x 250 mm Net Weight: 3kg For Battery Operated Units Battery Life: 4-5 hrs if all LED’s are on;...
- Page 4 4. Main Function 5 Channel DMX Mode: Channel Notes Value 0-255 Red dimming 0-255 Green dimming 0-255 Blue dimming 0-255 Amber dimming 0-255 White dimming 9 Channel DMX Mode: Channel Notes Value 0-255 Red dimming 0-255 Green dimming 0-255 Blue dimming 0-255 Amber dimming 0-255...
- Page 5 5. Rear Panel Display and Operation LED Display 120V AC OUT 120V AC IN DMX OUT DMX IN Menu Up Down Enter Selection buttons DMX input/output Power in/out Selection Buttons: MENU: Access the menu or return to a previous menu option UP: Menu selection or parameter increments DOWN: Menu selection or parameter increments ENTER: Select the current menu option...
- Page 6 6. Instructions for Manual Programming MENU and submenus: • ”addr”: DMX mode (A001-A512) • “Chnd”: Selects between 5-channel and 9-channel DMX modes • “SLmd”: Selects between Master/Slave modes (MASt, SL 1, SL 2) • ”Shmd”: Selects different preset modes within the following submenu: •...
- Page 7 For Preset Colors: Solid colors from the “Colo” mode (see previous page) and their RGBAW values: • Press MENU, to bring up the main menu • Press UP / DOWN until “Shmd” • Press ENTER to choose, the display will be blinking •...
- Page 8 7. Master/Slave Control The MASTER functions as a master as long as it’s not in DMX mode (and ideally no cable plugged into the DMX INPUT on the unit). It sends a signal to the SLAVE through a DMX cable and synchronizes its settings to it.
Need help?
Do you have a question about the EDD-GL-BFLAT9 and is the answer not in the manual?
Questions and answers