Table of Contents
Advertisement
CHAPTER 2: SPECIFICATIONS
2.1 SPECIFICATIONS
SPECIFICATION
Measurement Range
Ground
Range
Status Range
Communications Cable
Hardware setting modes
Accuracy
Power Source
Power Supply
Voltmeter auto detection?
Measurement Rate
Autosensing?
TABLE 2-1. GENERAL SPECIFICATIONS
DESCRIPTION
0 to +60V or -60 to 0VDC
Isolated ground for protection against a differential ground between the target device and the
sensor
Full auto ranging from -60VDC to +60VDC and from -5VDC to +5VDC
High Warning, Low Warning, High Critical, and Low Critical
RJ-45 jack to sensor using UTP Cat 5 wire
Maximum extension cable length 60 feet with approved low capacitance shielded cable or UTP
Wide Range Mode is -60 to +60 VDC with 0.01 V resolution and 1% accuracy.
High Resolution Mode is -5 to +5 VDC with 0.001 V resolution and 1% accuracy.
±1%. o Input Impedance: 1.6 Mohm when set at the High Scale (60 Volts maximum) and 1.1 Mohm
when set at the High Resolution Mode (5 volts maximum).
Unit provides power, so no additional power is needed.
12V/3A DC (US/EU standards, CE/FCC/UL certified)
The unit auto detects the presence of the Isolated Digital Voltmeter.
Multiple readings every second
Full Autosense including disconnect alarm
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
3
Advertisement
Table of Contents
