Installation - Logitech G PRO Setup Manual

INSTALLATION

1 DESK
1a Place the wheel base on your desk and ensure the feet
at the bottom are aligned against the edge
1b Insert the clamp into the hole at the front
1c Tighten the clamp by adjusting
the screw handle
Once the clamp has come into contact with the desk,
you only need between a half and one full turn of
the handle to achieve the correct level of clamping
Do not overtighten
NOTE:
– Also be aware of the construction of your desk and
its suitability for clamping a high-torque wheel to it
Some desks use a hollow-core construction, for example,
where you have a top piece of material and a bottom
piece Those pieces are likely to be thin and are unlikely
to stand up to the forces applied when the wheel is
clamped in place Logitech recommends only clamping
your PRO Wheel to a desk made from a solid material,
such as MDF or wood
1a
1b
4 ENGLISH
< 50 mm (1.97 in)
1c