Sound Output Selection - LG DI28Z12 Owner's Manual

I/II
18
Sound
NICAM broadcast reception
This set can receive the high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound.
Sound output can be selected according to type of the received
broadcast as follows by pressing the I/II button repeatedly.
1. When NICAM mono is received, you can select
MONO or FM MONO
2. When NICAM stereo is received, you can select
STEREO or FM MONO
FM mono.
3. When NICAM dual is received, you can select
II , DUAL I II or FM MONO
Language selection for dual language broadcast
If a programme is received in two languages (dual language), you
can switch to DUAL I
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loudspeakers.
DUAL I II sends a separate language to each loudspeaker.

Sound output selection

In AV mode, you can select output sound for the left and the right
loudspeakers.
Repeatedly press the I/II button to select the sound output.
L+R : Audio signal from audio L input is sent to left loudspeaker
and audio signal from audio R input is sent to right loud-
speaker.
L+L : Audio signal from audio L input is sent to left and right
loudspeakers.
R+R : Audio signal from audio R input is sent to left and right
loudspeakers.
.
. If the stereo signal is weak, switch to
.
, DUAL II or DUAL I II
NICAM
NICAM
DUAL I , DUAL
by pressing the I/II