Table of Contents
Advertisement
®
TV/AV
ARC
MENU
OK
select
PSM
16
Picture
Picture adjustment
You can adjust picture contrast, brightness, colour intensity, tint
and sharpness to the level you prefer.
1. Press the MENU button then the GREEN button.
2. Select a desired item with the
3. Adjust the value with the
Note :
adjustment is available when receiving a NTSC signal
Tint
via the AV input sockets.
At this point you can complete your adjustment or store your
setting for immediate recall by following steps 4 to 7.
4. Select
Store
with the
5. Press the OK button.
6. Select
Favorite 1
7. Press the OK button.
Exit the menu by pressing the TV/AV button.
Your setting for picture is now stored are remains your preferred
setting until you store different values with this menu. Your
preferred setting is retained even when the set is switched off by
the main power button.
To recall your preferred setting, press the PSM button until the
desired picture (
Standard
The
Standard
picture is programmed for good picture reproduc-
tion at the factory and cannot be changed.
Picture format selection
You can watch the TV in various picture formats.
Press the ARC button to switch to 4:3, 16:9, Zoom 1, Zoom 2 or
Auto picture format. Also see page 13, VCR automatic switching.
4:3 Normal
This is normal picture size 4 by 3 as displayed on all TV sets.
16:9 Wide screen
Cinema screen pictures are viewed like this. Some TV stations
broadcast programmes (mainly films) in the mode. To enjoy the
cinema picture, select this mode.
Zoom 1
The normal 4 by 3 picture is magnified to fill the whole screen but
the extreme top and bottom of the picture are lost.
Zoom 2
Similar to Zoom 1 but the picture is shifted upwards so that
subtitles at the bottom of the picture can be viewed, therefore the
top of the picture is lost.
Auto Picture format
When your TV receive the wide screen signal, it will automatically
change to the picture format to be sent.
If you want to change the desired picture format, press the ARC
button.
Note : Satellite 16:9 Wide screen. Some TV stations (BBC)
broadcast programmes in Wide screen 16:9 format on Digital
Satellite but the actual picture has black bands at the side showing
a smaller 14:9 display. This has done by the broadcaster to retain
compatibility with non wide screen TV's. Pressing the ARC button
will not expend the picture any further as the broadcast is actually
in 16:9 mode. If you view the same programme on terrestrial
analogue the picture will probably be broadcast in 4:3 and
therefore the ARC will expand the picture to 16:9 mode. This is not
a fault of the TV but is due to the way some broadcasters transmit
their programmes differently on digital and analogue formats.
D
E
button.
/
F
G
button.
/
D
E
button.
/
or
Favorite 2
with the
,
Favorite 1
or
Favorite 2)
D
E
/
button.
appears.
Advertisement
Table of Contents
