Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for NormaTec PULSE 2.0
Summary of Contents for NormaTec PULSE 2.0
- Page 1 PULSE User Manual PULSE 2.0 User Manual...
-
Page 2: Table Of Contents
TABLE OF CONTENTS >> Warnings Labels Indications for Use Risks and Benefits of the NormaTec PULSE 2.0 Recovery System Illustrations Operating Instructions Set up the System Adjust the Intensity and Time Bluetooth® Wireless Technology Start, Pause, and Stop the Session... -
Page 3: Warnings
WARNINGS >> Read the entire instruction manual before using the NormaTec PULSE 2.0 Recovery System. WARNING! No modification of this equipment is allowed. WARNING! If you experience severe pain, any unusual symptoms, or want to remove the attachments in an emergency during use: •... -
Page 4: Labels
• Do not use the PULSE 2.0 Recovery System air output or hose to direct pressurized air toward your eyes, nose, mouth, or ears. Doing so may lead to serious injury. • Use by unconscious or incapacitated persons may be dangerous without supervision. -
Page 5: Indications For Use
RISKS AND BENEFITS OF THE NORMATEC RECOVERY SYSTEM >> The risks and benefits of using the NormaTec PULSE 2.0 Recovery System are the same as having a massage. If the NormaTec massage feels uncomfortable, you can reduce the intensity or stop the session. -
Page 6: Illustrations
9. Play/pause button NORMATEC HOSE (single-person use only) 1. Junction box air outlets 2. Junction box 3. Blocking plug (on the underside of the junction box) 4. Connector LEG ATTACHMENT (single-person use only) 1. Attachment connector 2. Zones PULSE 2.0 User Manual... -
Page 7: Operating Instructions
PULSE 2.0 device and an electrical outlet. Step 2: Connect the hose connector to the air outlet on the PULSE 2.0 device. The connector can only be inserted in the correct orientation. Insert the connector firmly into the PULSE 2.0 device until you hear an audible “click.”... -
Page 8: Bluetooth Wireless Technology
Press firmly to make sure the blocking plug is fully seated. Step 5: Press the power button on the PULSE 2.0 device firmly for one second to turn on the system. While the device is on, the green LED next to the power button will be lit up. -
Page 9: Turn Off The Device
CHANGE THE MASSAGE PATTERN The massage pattern can be set to NormaTec Pulse or Sequential. If the device is set to Sequential mode, it will be displayed under the session time. To enable and disable the Sequential massage pattern, set the device to Level 7 and then hold the... -
Page 10: Caring For The System
Before the NormaTec Pulse massage pattern begins, you will experience a pre-inflate cycle, during which the connected attachments are molded to your exact body shape. Once the pre-inflate cycle is complete, the NormaTec Pulse massage pattern will begin by compressing your feet, hands, or upper quad (depending on which attachment you are using). Similar to the kneading and stroking performed during a massage, each zone of the attachments will first compress in a pulsing manner and then release as the compression pattern works its way up your limb. -
Page 11: Technical Information
BLUETOOTH WIRELESS TECHNOLOGY The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc., and any use of such marks by NormaTec is under license. In the unlikely event of loss of a stable Bluetooth connection, the system will attempt to re-establish its connection automatically. - Page 12 The information contained in this section (such as separation distances) is in general specifically written with regard to the NormaTec PULSE 2.0. The numbers provided will not guarantee faultless operation but should provide reasonable assurance of such. This information may not be applicable to other medical electrical equipment; older equipment may be particularly susceptible to interference.
- Page 13 ELECTROMAGNETIC IMMUNITY This equipment is intended for use in the electromagnetic environment specified below. The user of this equipment should assure that it is used in such an environment. COMPLIANCE IMMUNITY ELECTROMAGNETIC IEC 60601-1-2 TEST LEVEL LEVEL (OF THIS AGAINST ENVIRONMENT DEVICE) Electrostatic...
- Page 14 RF compliance level above, the equipment should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating the equipment. PULSE 2.0 User Manual...
- Page 15 RECOMMENDED SEPARATION DISTANCES >> Recommended separation distances between portable and mobile RF communications equipment and the NormaTec device. SEPARATION DISTANCE ACCORDING TO FREQUENCY OF TRANSMITTERS IN METERS RATED MAXIMUM OUTPUT POWER OF 150 kHz – 80 MHz 80 MHz to 800MHz 800 MHz to 2.5 GHz...
-
Page 16: Troubleshooting
NormaTec attachments and other accessories are warranted by NormaTec against manufacturing defects in material and workmanship for a period of two years from the date of purchase from NormaTec. In the event of any such defect occurring during the warranty period, NormaTec will, at its option, (a) correct the defect by repair or by replacement of the applicable part or component that fails as a result of such defect, without charge for parts and labor;... -
Page 17: Return Policy
NormaTec at 480 Pleasant Street, Suite A200, Watertown, MA 02472 USA, postage prepaid and insured, with an indication of the nature of the defect and a NormaTec RMA number. You can obtain an RMA number by contacting NormaTec at +1.617.658.5800 or support@normatecrecovery.com. - Page 18 480 Pleasant Street | Suite A200 | Watertown, MA 02472 | USA www.NormaTecRecovery.com | +1.617.658.5800 NTRecovery NTrecovery NormaTecRecovery...