Advertisement
Quick Links
with the
GET TO KNOW NORMATEC
NORMATEC IS
High tech recovery massage
The leader in rapid recovery and proven to give clients a competitive edge.
Dynamic compression for clients who are active, such as those who have a physically demanding lifestyle, are on their feet all day, experience sore muscles, etc.
STUDIES SHOW NORMATEC HELPS
— Enhance healthy circulation
— Decrease muscle soreness and fatigue
— Increase flexibility
— Speed recovery
— Promote relaxation
NORMATEC SESSION
BEFORE THE RECOVERY SESSION
Remove shoes
Empty pockets
Clothes should be comfortable and soft (KT tape is fine)
If needed, use a towel to remove any massage lotions or oils from the skin
GOOD TO KNOW
TYPICAL SESSION TIME 20 – 60 minutes
LOW PRESSURE* Levels 1 – 3; high tech warm-up, promote blood flow
AVERAGE PRESSURE* Levels 4 – 7; recovery massage to speed up muscle recovery, decrease muscle fatigue and stiffness
For clients experiencing NormaTec for the first time, we recommend lower pressure levels*.
*All pressure levels should be based on client preference. Outstanding results can be achieved at low pressures; a client does not need to use high
pressure to recover faster.
ZONE BOOST provides extra time and pressure in a particular zone. To turn Zone Boost on or off, tap the zone you wish to boost on the attachment graphic on
the home screen.
TO PAUSE THE SESSION at any time, tap the pause button on the home screen. This will temporarily stop the session. To resume a paused session, tap the
resume button.
RECOVERY SESSION
NORMATEC PULSE 2.0
Page 1 of 3
Advertisement
Related Manuals for NormaTec PULSE 2.0
Summary of Contents for NormaTec PULSE 2.0
- Page 1 AVERAGE PRESSURE* Levels 4 – 7; recovery massage to speed up muscle recovery, decrease muscle fatigue and stiffness For clients experiencing NormaTec for the first time, we recommend lower pressure levels*. *All pressure levels should be based on client preference. Outstanding results can be achieved at low pressures; a client does not need to use high pressure to recover faster.
- Page 2 CLEANING Attachments and hose should be wiped down with a disinfectant wipe after each client. STORAGE When not in use, hang the attachments on hooks or place in drawer. GENERAL The NormaTec Recovery System attachments and device should be kept away from liquids to avoid damage. SETTING UP THE NORMATEC PULSE STEP 1 Select the appropriate attachment (legs, hips, arms) for the client’...
- Page 3 STEP 6 Adjust the number of zones, if necessary. (Such as if using a short let attachment, a let attachment that is too long, or the hip attachment.) — To enter zone edit mode, set power level to 1 and then hold the ‘-’ button to the left of the power level on the PULSE 2.0 device down for four seconds (until the top enabled zone of the boots begins blinking).