Table of Contents
Advertisement
OPERATIONAL INSTRUCTIONS
Video Setup
SCREEN SAVER
The Screen Saver protects your screen from damage and is activated
when the DVD player is in Stop mode, Open, No-disc state, or when
there is a frame frozen for more than 60 seconds.
• ON: Activates the Screen Saver
• OFF: Deactivates the Screen Saver
Note:
The default setting is ON
BRIGHTNESS
Use the NAVIGATION / buttons to adjust
the brightness of the screen.
CONTRAST
Use the NAVIGATION / buttons to adjust
the contrast of the screen.
SATURATION
Use the NAVIGATION / buttons to adjust
the saturation of the screen.
15 | iLuv
OPERATIONAL INSTRUCTIONS
Basic DVD Operation
Turn on your TV and your iPod / DVD Player
• Press the POWER button on the remote control or on the player itself.
The iPod/DVD selection interface will display on TV screen.
• Press the NAVIGATION / buttons to select DVD
• Press the ENTER button to enter to DVD work mode.
Place disc in the player
• Press the OPEN / CLOSE button on the remote control or on the front panel of the player itself.
"OPEN" will display on the screen.
• Carefully place a DVD into the disc tray with the label facing up
(double-sided discs have content on both sides and can be placed in any direction).
• Press the OPEN / CLOSE button again. "CLOSE" will display on the screen.
• The disc will begin playback immediately.
Note: There are some discs which will not play immediately.
When this happens, press the PLAY button or ENTER button to initiate playback.
Play
The contents a disc may vary depending on how it was programmed and what features are offered.
Selections made from the menu will only function if the disc is designed for such operation. The
following play modes are offered.
Menu Play (DVD, SDVD, VCD 2.0)
1. Press the MENU button.
TV screen displays the DVD root menu when there is a disc loaded.
PBC (Play-back-control) is initialized when an SVCD or VCD2.0 disc is loaded.
2. With a DVD loaded, press the NAVIGATION / buttons to choose the menu item you desire.
3. Press the ENTER or PLAY button to confirm.
4. During DVD playback, press MENU (PBC) button to return to the root menu.
5. During SVCD or VCD playback, when PBC is activated, press the RETURN button to return to the menu.
6. Stop
Press the STOP button once to stop and hold playback.
Press the PLAY button to resume playback from the place where it stopped.
i1255 | V10M10_IM_EN_01223008
iLuv | 16
Advertisement
Table of Contents
