Table of Contents
Advertisement
TROUBLESHOOTING GUIDE
iPod Problems - Possible Solutions
Can't switch to iPod mode
• Wait until the iPod has been initiallized.
• Make sure the iPod is connected securely to the integrated dock.
• Confirm that your iPod has been recharged with a depleted battery.
• Upgrade your iPod firmware to the latest version.
• If the TV screen continues to be frozen for 80 seconds, after inserting your iPod, your iPod has to be
reset. Press and hold Menu and Center buttons of your iPod for about six to ten seconds until the Apple
logo appears on your iPod screen. When your iPod starts to operating normally again, connect it to i1255.
Do not hear any sound from AV Device
• Make sure the AV device is properly connected to i1255.
• Make sure the TV or audio amplifier is connected to the FR/FL jacks of i1255.
Nothing shows when playing a video
• Make sure the TV is propely connected to i1255.
• Make sure the i1255's video output has been set to S-Video.
• Confirm that the video output on your iPod has been set to ON.
• Make sure i1255 video is connected to TV through composite video or S-video jack.
The iPod buttons on the remote control don't respond
• Make sure your iPod is connected securely to the integrated dock.
• Reset i1255 by taking your iPod out of the integrated clock and putting it back into the integrated dock.
• Press the iPod/DVD button on the remote control twice to reconnect your iPod.
My iPod is frozen
• Reset your iPod by pressing and holding the Menu and Center (Select) buttons on your iPod to reset.
• Refer to the instruction manual for your iPod itself.
19 | iLuv
TROUBLESHOOTING GUIDE
DVD Problems - Possible Solutions
No power
• Check to ensure that the power plug is securely in the wall outlet.
• Check to ensure that the "MAIN POWER SWITCH" in the back of unit
No sound and POWER switch is turned on.
• Check the connection between the DVD player and the TV set, amplifier, or any other unit it is connected to.
• Check to ensure the TV and amplifier are in the correct mode.
No picture
• Check the connection between the DVD player and the TV set or any other unit it is connected to.
• Check to make sure TV is turned on.
• Check to make sure TV system or Video mode is correctly set.
Disc does not play
• Check to make sure the disc is loaded correctly label side facing up on disc tray.
• Check that disc is clean from dirt, dust, fingerprints, and smudges.
• Check to ensure disc is with in the guides on the tray.
• Check if parental lock function is on.
• Make sure disc is for use in region
Remote does not work.
• Check batteries; possibly replace.
• Check to ensure there isn't any obstacles between the remote sensor
on the unit's front panel and the remote control.
• Be sure the remote is aimed at the remote sensor.
Divided picture
• Check that disc is clean and has no scratches.
• The unit is controlled by a micro computer, which may need to be reset.
Turn off the unit's power, wait several seconds, then turn back on.
No Color Picture
• Check to see if the connector is damaged.
i1255 | V10M10_IM_EN_01223008
iLuv | 20
Advertisement
Table of Contents
