Advertisement
PACKAGE CONTENTS
I
V-T4M Connection terminal x 1
I
12V DC power supply x 1
I
Snap-in "Christmas Tree" plugs x 2
I
Snap and lock removable speaker connectors x 5
I
Removable 12 Volt control connectors x 4
PREPARING FOR INSTALLATION
The Speakers/Volume Control cables, Amplifier
cables and 12V DC power supply cable must all reach
the proposed location of the V-T4M distribution
connection terminal. Mark the cables with Wire
labels, describing where the cables originate from,
rather than where they will terminate. Locate a
switched AC outlet on your Receiver or Amplifier to
be used to power theV-T4M power supply.
Calculating the Impedance
Magnification Setting:
To ensure optimal operation of your amplifier or
receiver, your speakers must show it a load that it
can handle safely and effectively. This requires the
use of impedance-magnifying (IM) volume controls.
CAUTION! Every speaker pair in the system must be
connected to an impedance-magnifying volume
control and set to the same magnification.
When you install the V-T4M and connect the volume
controls to it, double-check the DIP-switches on the
volume controls to verify that they are set correctly
for the impedance load of your speakers.
Use the following instructions and the accompanying
charts to select the correct DIP switch setting on the
volume controls for the number and type of speakers
in your system.
3
Advertisement
