Page 1
DATA SHEET For Parallel Signal Distribution to Multiple Muting Volume Controls V-T4M MUTING VOLUME CONTROL CONNECTION TERMINAL...
Page 2
V-T4M MUTING VOLUME CONTROL CONNECTION TERMINAL FEATURES • Safely connect up to four speaker pairs to a single amplifier or receiver • High power handling capability • Built-in protection circuit • Compatible with all 4 ohm capable amplifiers or receivers •...
Page 3
PREPARING FOR INSTALLATION: The Speakers/Volume Control cables, Amplifier cables and 12V DC power supply cable must all reach the proposed location of the V-T4M distribution hub. Mark the cables with Wire labels, describing where the cables originate from, rather than where they will terminate. Locate a switched AC outlet on your Receiver or Amplifier to be used to power the V-T4M power supply.