Table of Contents
Advertisement
Switch the appliance on again if
necessary. The è and Ø symbols will
flash. If the symbols are off, the door
can be opened.
Cancel the programme
For programs at high temperature:
Touch the control panel A.
1.
To cool the laundry: Select Rinse.
2.
And touch A again.
3.
For programmes at low temperatures:
Touch A.
1.
Select Spin or Drain.
2.
And touch A again.
3.
When cancelling programmes
Note:
that use active oxygen, the door will
remain locked for up to 25 minutes until
there is no longer any active oxygen in
the drum.
Switch the appliance on again if
necessary. The è and Ø symbols will
flash. If the symbols are off, the door
can be opened.
Programme end during rinse
hold
The A indicator flashes in the display
panel, and the preset spin speed and
remaining programme length are
displayed for the selected programme.
Continue the programme by:
Touching A on the control panel or
■
Changing the spin speed and then
■
touching A or
Selecting the Easy-Iron Q setting
■
and then touching A or
Turning the programme selector to
■
Drain and then touching A.
Operating the appliance
Programme end
End lights up in the display panel and
the A and è displays are off.
If the Û display flashes, this
Note:
informs you to run the Drum Clean
programme or any other programme at
a washing temperature of at least
60 °C.
Removing laundry/switching
off the appliance
Open the loading door and remove
1.
the laundry.
Switch off the appliance.
2.
Turn off the tap.
3.
Not required for AquaStop
Note:
models.
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Wipe the rubber gasket dry.
■
Leave the washing machine door
■
and detergent drawer open so that
any residual water can dry away.
Always wait for the end of the
■
programme, otherwise the appliance
may still be locked. Then switch on
the appliance and wait for it to
unlock.
en
35
Advertisement
Table of Contents
