Display / Led Check Mode; Factory Reset Mode; Auto Standby Test Mode - Marantz HD-DAC1 Service Manual

2. Display / LED check mode

2.1. Operation
To enter the special mode.
･Press the Power operation " X "and SETUP buttons simultaneously while inserting the AC plug to turn the power on.
･Press the "SETUP" button.
2.2. Actions
The DISPLAY and LED are all lit or all off with an interval of about 1 second.
To exit the special mode disconnect the adapter plug.
Press the "SETUP" button to move to the Factory reset mode.
Press for 1 second or more the "SETUP" button to move to the Auto standby test mode.

3. Factory reset mode

3.1. Operation
To enter the special mode.
･Press the Power operation " X "and SETUP buttons simultaneously while inserting the AC plug to turn the power on.
･Press the "SETUP" button until "Factory Reset is displayed.
F a c t o r y
FLD
R e s e t
3.2. Actions
When after two seconds or more without taking any action, and then start the initialization.
Initializing
FLD
R e s e t . . .
After reset, return to the normal mode.

4. Auto standby test mode

3.1. Operation
To enter the special mode.
･Press the Power operation " X "and SETUP buttons simultaneously while inserting the AC plug to turn the power on.
･Press the "SETUP" button to move to the Display/LED check mode.
･Press for 1 second or more the "SETUP" button.
A u t o S t b y
FLD
T e s t
3.2. Actions
Set the Auto Standby time to 4 minutes.
To exit this mode disconnect the adapter plug.
24