Using Wps - Buffalo AirStation WI-U2-433DM User Manual

Using WPS

If your access point supports WPS, you can use it to directly connect to the access point. You can use either the push-
button method or the PIN method to start WPS.
Push-Button Method
1
Connect the AirStation to the Mac and open "Wireless Network Utility" from the Launchpad.
2
Click WPS; select an SSID and click Push-Button Method.
3
Within 2 minutes, then press WPS or AOSS button on the access point. The example below is using an AirStation
WZR-1750DHP.
Note: The push-button method may be different depending on the access point model. For more details, refer to
19