Yamaha Fascino S 2021 Supplementary Service Manual page 13

GEN
SPECIAL TOOLS
INFO
Tool name/Tool No. Illustration
Bearing puller 6202
YSST-624
This tool is used to remove the bearings of
main axle (transmission cover).
Bearing puller 6203
YSST-624 A
This tool is used to remove the bearing of drive axle
(left crankcase).
Upper and lower race installer
YSST-626
M20
This tool is used to install upper and lower races.
Tappet screw holder
YSST-706
(90890-04154)
3sq
This tool is used to adjust valve clearance.
Tappet screw socket
YSST-706 A
Hex 8
This tool is used to adjust valve clearance.
Bearing puller
YSST-723
This tool is used to remove the bearing 6202 of the
V-belt case cover and front wheel.
Wooden plunk
YSST-892
This tool is used to stand the scooter at center.
Bush
ODØ18
YSST-893
IDØ12
This tool is used as an attachment with crankshaft
remover.
1-8