Table of Contents
Advertisement
44.3 Ping/TraceRoute/Nslookup Test/ Speed Test
Use this screen to ping, traceroute, nslookup, or speed test for troubleshooting. Ping and traceroute are
used to test whether a particular host is reachable. After entering an IP address and clicking one of the
buttons to start a test, the results will be shown in the Ping/Traceroute Test area. Use nslookup to find the
IP address for a host name and vice versa. Use speed test to determine the download and upload
speed.
Note: Not all Zyxel Devices support speed test; see
information.
Click Maintenance > Diagnostic to open the following screen.
Figure 263 Maintenance > Diagnostic
The following table describes the fields n this screen.
Table 166 Maintenance > Diagnostic
LABEL
Ping/TraceRoute Test
Diagnostic Test
TCP/IP
Address
Ping
Ping 6
Chapter 44 Diagnostic
DESCRIPTION
The result of tests is shown here in the info area.
The result of tests is shown here in the info area.
Type the IP address of a computer that you want to perform ping, traceroute, or nslookup in
order to test a connection.
Click this button to perform a ping test on the IPv4 address or host name in order to test a
connection. The ping statistics will show in the info area.
Click this button to perform a ping test on the IPv6 address or host name in order to test a
connection. The ping statistics will show in the info area.
AX/DX/EX/PX Series User's Guide
411
Chapter 1 on page 62
for more
Advertisement
Table of Contents
Troubleshooting
