ZyXEL Communications AX Series User Manual page 305

To change your Zyxel Device's media server settings, click Network Setting > USB Service > Media Server.
The screen appears as shown.
Figure 186 Network Setting > USB Service > Media Server
The following table describes the labels in this menu.
Table 104 Network Setting > USB Service > Media Server
LABEL DESCRIPTION
Media Server Click this switch to have the Zyxel Device function as a DLNA-compliant media server. When the
switch goes to the right
Enable the media server to let (DLNA-compliant) media clients on your network play media files
located in the shares.
Interface Select an interface on which you want to enable the media server function. An interface can
be added or modified in Network Setting > Interface Grouping.
Volume This is the volume name the Zyxel Device gives to an inserted USB device. Select a volume in the
USB storage device(s) to allow the Zyxel Device media server access. Select All USB Devices to
enable access on all volumes.
Media Library Enter the path clients use to access the media files on a USB storage device connected to the
Path Zyxel Device.
Cancel Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes.
Chapter 18 USB Service
, the function is enabled. Otherwise, it is not.
AX/DX/EX/PX Series User's Guide
305