Advertisement
Advertisement
Table of Contents
Related Manuals for Knightsbridge BF1430EM
Summary of Contents for Knightsbridge BF1430EM
- Page 1 INSTALLATION & MAINTENANCE MANUAL BF1430EM / BF2440EM...
- Page 2 These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following products: BF1430EM / BF2440EM SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
- Page 3 • • Fig. 1 • Remove the three fixing screws securing the LED plate • • Remove the LED plate and disconnect from the driver (via the DC socket) and emergency inverter (via the • • YJD socket) • • Drill the fixing holes in the rear of the fitting. Mark the location of the fixing holes and drill ensuring not to •...
- Page 4 • Ensure the battery is connected via the plug and socket to the emergency inverter • Refasten the LED plate screws • Reattach the diffuser by rotating clockwise • • Switch on and check for correct operation, ensuring the green indicator LED is illuminated •...
- Page 5 This product should be dismantled for disposal when it reaches the end of its life. Please see website for dismantling instructions. This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities for where facilities exist.
- Page 6 TESTING FOR EMERGENCY LUMINAIRES Recommended routine test procedure in accordance with BS5266 • Daily check – check LED charge indicator is illuminated • Monthly functional test - simulate a mains supply failure for approx. 30 seconds by operation of key switch or switching off circuit breaker.
- Page 8 INTERNATIONAL CONTACT DETAILS -20~ 50°C ML Accessories Limited LU5 4LT www.mlaccessories.co.uk AVSEP21_V4...
Need help?
Do you have a question about the BF1430EM and is the answer not in the manual?
Questions and answers