Denon AVR-X6400H Owner's Manual page 26

Contents Connections
i o Q0 Q1
F HDMI connectors
Used to connect devices equipped with HDMI connectors.
"Connection 1 : TV equipped with an HDMI connector and
0
compatible with the ARC (Audio Return Channel)" (v p. 74)
"Connection 2 : TV equipped with an HDMI connector and
0
incompatible with the ARC (Audio Return Channel)" (v p. 75)
"Connecting a set-top box (Satellite tuner/cable TV)" (v p. 78)
0
"Connecting a DVD player or Blu-ray Disc player" (v p. 79)
0
"Connecting a Blu-ray Disc player compatible with the Denon Link
0
HD function" (v p. 80)
Front panel Display
Playback
y
Rear panel
Settings
G AC inlet (AC IN)
u
Used to connect the power cord. (v p. 90)
H FM/AM antenna terminals (ANTENNA)
Used to connect FM antennas and AM loop antennas. (v p. 84)
I TRIGGER OUT jacks
Used to connect devices equipped with the trigger function.
(v p. 89)
J REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to operate this
unit and external devices from a different room. (v p. 88)
K RS-232C connector
Used to connect home automation controller devices fitted with
RS-232C connectors. Consult the owner's manual of the home
automation controller for more information about serial control of this
unit.
Perform the operation below beforehand.
A Turn on the power of this unit.
B Turn off the power of this unit from the external controller.
C Check that the unit is in the standby mode.
26
Remote
Tips Appendix
Index