Table of Contents
Advertisement
Installation, Operation, and Maintenance Manual
ES-09373-1
5.3
Rotary Actuator Installation
Figure 5-3 Installation on a Rotary Actuator
NOTICE
When installing the mounting bracket on the positioner and the set on the rotary
pneumatic actuator, observe the maximum torque indicated below:
Positioner on the mounting brackets (4xM6): 10 Nm (7.38 ft/lbs.).
Mounting bracket on the rotary actuator (4xM5): 10 Nm (7.38 ft/lbs.).
Before installing the positioner, check the area classification. Never use a general-
purpose positioner in a classified area with explosion risk. The positioner allows
mounting to standard NAMUR rotary actuators (VDI/VDE 3835, IEC 60534-6-2). The
figure below illustrates the parts of the universal rotary mounting kit.
Mechanical Installation
Mechanical Installation
Figure 5-4 Mounting Kit for Rotary Actuator
August 17, 2022
11
Advertisement
Table of Contents
