SEARCH FOR SENSORS
• If a sensor loses connection to the display for any reason, the display will show
NO on screen after 30 minutes.
• The display will automatically search for 3 minutes every hour to try and reconnect
with the sensor.
• Hold the
+ (PLUS)
search for the outdoor sensor(s).
• Install a new set of alkaline batteries and press the sensor's TX button to force a
transmission. This will often connect it right away.
• If the connection still cannot be reestablished, visit our support page here:
bit.ly/basic_restart
SENSOR DISPLAY
• There is a Channel Selector and TX button inside the
sensor battery compartment.
• Press the
TX
button on to manually send a signal.
Hold the
TX
button to select Fahrenheit or Celsius
temperature display on the sensor.
• The boxed number on the bottom indicates the
channel selected on the sensor.
• The transmission waves will animate during
transmission and be solid when not transmitting.
LOW BATTERY INDICATOR
• When the Low Battery Icon shows by the time, replace batteries in the
display
.
• When the Low Battery Icon shows by Sensor 1, replace batteries in Sensor 1.
• When the Low Battery Icon shows by Sensor 2, replace batteries in Sensor 2.
button until the Reception Icon
for further troubleshooting.
starts to animate to manually
7