La Crosse Technology TX146 Setup Manual

La Crosse Technology TX146 Setup Manual

Remote sensor

Advertisement

Quick Links

Remote Sensor
SET UP GUIDE
MODEL: TX146

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TX146 and is the answer not in the manual?

Questions and answers

Summary of Contents for La Crosse Technology TX146

  • Page 1 Remote Sensor SET UP GUIDE MODEL: TX146...
  • Page 2: Button Functions

    4. Once sensor readings show on the display, place them where desired. For outside mounting tips visit: bit.ly/th_sensor_mounting. Note: The sensors will come preset to Channel 1 (sensor 1) and Channel 3 (Sensor 2). In most cases, these switches will not require adjustment. TX146 308-149 Sensors Station BUTTON FUNCTIONS SET: Hold to enter the Settings Menu.
  • Page 3 DISPLAY AND SENSOR MOUNTING Display: Place the display directly on a table using the built-in pull-down stand on the back. Alternatively, hang it on a wall or refrigerator using the triangle hanging hole or rear magnets. Magnets or hanging hole on the back to mount on a wall or refrigerator.
  • Page 4: Settings Menu

    SETTINGS MENU 1. Hold the button until the display changes to the Settings Menu. 2. Use the CLEAR | - button to adjust the values. Hold to adjust quickly. 3. Press the button to confirm and move to the next item. Settings Menu Order: •...
  • Page 5 HIGH/LOW RECORDS The display will record High and Low Records with time and date stamps for each sensor. View Records: Tap and release the HIGH/LOW button on the front of your display to view records from both sensors. Viewing Order: •...
  • Page 6 Set & Disarm Alerts: 1. Hold the ALERTS button until the display changes to Alert Settings. 2. Use the CLEAR | - button to arm or disarm the alert. Press the ALERTS button to confirm and move to the alert value. 3.
  • Page 7: Sensor Display

    SEARCH FOR SENSORS • If a sensor loses connection to the display for any reason, the display will show NO on screen after 30 minutes. • The display will automatically search for 3 minutes every hour to try and reconnect with the sensor.
  • Page 8: Stay In Touch

    STAY IN TOUCH Ask questions, watch setup videos, and provide feedback on our social media outlets. Follow La Crosse Technology on YouTube, Twitter, Facebook and Instagram. WE’RE HERE TO HELP If you require additional support, get in touch with our friendly customer support team based in La Crosse, WI.
  • Page 9: Battery Instructions

    BATTERY INSTRUCTIONS WARRANTY La Crosse Technology, Ltd. provides a 1-year Battery replacement instruction: limited time warranty (from date of purchase) When batteries of different brand or type on this product relating to manufacturing are used together, or new and old defects in materials &...
  • Page 10: Fcc Statement

    FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 11: Canada Statement

    CANADA STATEMENT This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Table of Contents