Samsung AJ BNHDCH Series Installation Manual page 31

Setting the indoor unit address and installation option
1 Make sure that the power is supplied to the indoor unit.
• If the indoor unit is not plugged in, it must include a power supply.
2 Set an address and installation option for each indoor unit using the remote control, according to your air conditioning system plan.
Setting an indoor unit address (MAIN/RMC)
• The indoor unit address are set to 0A0000-100000-200000-300000 by default.
Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1
Explanation Page
Indication Details
Indication
and details
0
Option SEG7
Explanation Page
Indication Details
Indication
and details
1
CAUTION
• When "A"~"F" is entered to SEG4~6, the indoor unit MAIN ADDRESS is not changed.
• If you set the SEG 3 as 0, the indoor unit will maintain the previous MAIN ADDRESS even if you input the option value of SEG4~6.
• If you set the SEG 9 as 0, the indoor unit will maintain previous RMC ADDRESS even if you input the option value of SEG11~12.
SEG2 SEG3
Mode Setting main address
Indication Details Indication Details
No main
0
address
A
address
1
setting
SEG8 SEG9
Setting RMC address
Indication Details
No RMC
0
Reserved
address
address
1
setting
SEG4
Indication
Reserved
Main
mode
SEG10
Indication
Reserved
RMC
mode
SEG5 SEG6
10-digit of indoor A single digit of
unit indoor unit
Details Indication
0~9 10-digit 0~9
SEG11 SEG12
Group channel(*16) Group address
Details Indication
RMC1 1~F RMC2
English
Details
A
single
digit
Details
1~F
31