Voice Dialling; Make A Conference Call; Answer Or Reject A Call - Nokia N6210 Manual

Table of Contents

Advertisement

To define the call mailbox number if no number is set,
select
> Settings > Call mailbox. Scroll to Voice
mailbox, and enter the corresponding mailbox number.
To change the call mailbox number, select Options >
Change number. For the call mailbox number, contact
your service provider.

Voice dialling

A voice tag is added automatically to all entries in
Contacts. Use long names, and avoid similar names for
different numbers.
Make a voice dialling call
Voice tags are sensitive to background noise. Use voice
tags in a quiet environment.
Note: Using voice tags may be difficult in a
noisy environment or during an emergency, so
you should not rely solely upon voice dialling in
all circumstances.
1.
In the standby mode, press and hold the right
selection key.
If you are using a compatible headset with the
headset key, press and hold the headset key.
2.
When Speak now is displayed, speak the voice
command clearly. The device plays the voice command
of the best match. After 1.5 seconds, the device dials
25

Make a conference call

Your device supports conference calls (network service)
between a maximum of six participants, including
yourself.
1.
2.
3.
4.

Answer or reject a call

To answer a call, press the call key.
To mute the ringing tone, select Silence.
To reject the call, press the end key, or select Options >
Reject. If you have activated Call divert > If busy, rejecting
the call diverts the call.
To send a text message as a reply to the caller instead of
answering the call, select Options > Send message.
Copyright © 2008 Nokia. All rights reserved.
the number; if the result is not the correct one, before
dialling select another entry.
Make a call to the first participant.
To make a call to another participant, select Options >
New call.
To create the conference call when the new call is
answered, select Options > Conference.
To add another person to the conference call, repeat
step 2, and select Options > Conference > Add to
conference.
To end the conference call, press the end key.

Advertisement

Chapters

Table of Contents
loading

Table of Contents