Advertisement
ATCA-ST
For service information call 800-544-3057
Please have the following information available before calling. Information can be found
on the identification/certification tag:
•Model Number
•Serial Number
•Date of Purchase
•Part Description and number as shown in parts list
This manual contains important safety information concerning the maintenance, use and operation of this product.
Failure to follow these instructions could result in damaging equipment, voiding the warranty, serious injury or even death.
CANTILEVER DISPENSERS
for T ray, Rack or Sheet Pan s
Installation and Operating Manual
2ATCA-ST
IMPORTANT INFORMATION
READ BEFORE USE
Piper Products, Inc
300 South 84th Avenue
Wausau, WI 54401
Phone: 715-842-2724 . FAX: 715-842-3125
ASCA-ST
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Piper ATCA-ST Series
Summary of Contents for Piper ATCA-ST Series
- Page 1 This manual contains important safety information concerning the maintenance, use and operation of this product. Failure to follow these instructions could result in damaging equipment, voiding the warranty, serious injury or even death. Piper Products, Inc 300 South 84th Avenue Wausau, WI 54401 Phone: 715-842-2724 .
-
Page 3: Table Of Contents
TABLE OF CONTENTS INTRODUCTION FREIGHT DAMAGE CLAIMS SAFETY PRECAUTIONS UNPACKING AND INSTALLATION MAINTENANCE GENERAL CLEANING SPRING TENSION ADJUSTMENT REPLACEMENT PARTS BREAKDOWN WARRANTY Model # Serial # Date of Manufacture Purchased From:... -
Page 4: Introduction
Congratulations! You have just purchased one of the finest pieces of equipment on the market today. Be- fore installing or operating your new Piper equipment, you should read through this manual. This manual should be retained for future reference as it contains installation and operating instructions, service tips, part lists and warranty information. -
Page 5: Maintenance
Do not use any chlorinated or highly caustic cleaners, acids, ammonia or other corrosive cleaners. These may cause corrosion and/or damage to the stainless steel. Piper only approves soap and water for cleaning stainless steel. Do not allow water to stand in wells for long periods of time. -
Page 6: Spring Tension Adjustment
4. Attach or detach springs from the tray carrier (C) to adjust the carrier to the desired height. Leave unused springs hanging in unit. 5. Replace front cover and retaining strip. For more detailed instructions contact Piper technical support at 800-544-3057... -
Page 7: Replacement Parts Breakdown
STEEL CABLE 13-101082 PULLEY, METAL BALL BEARING CSTR-4POP CASTER, 4” CONSULT FACTORY RETAINER STRIP , FRONT PANEL Many components of Piper cantilever dispensers are dependant on the tray size. Please provide model number when calling to ensure correct part numbers. - Page 8 Piper Products Service Department shall be final. Any defective parts to be repaired or replaced must be returned to Piper Products, Inc., 300 South 84th Avenue, Wausau, WI 54401, transportation charges prepaid, and they must be properly packed and tagged.
- Page 9 NOTES...
- Page 10 Piper Products, Inc 300 South 84th Avenue Wausau, WI 54401 Phone: 715-842-2724 . FAX: 715-842-3125...
Need help?
Do you have a question about the ATCA-ST Series and is the answer not in the manual?
Questions and answers