The IRONCLAD Erasure Verification System is used with the Table of Contents page Garner HD-3WXL hard drive degausser to capture an image of Ports & Connecting IRONCLAD the erased hard drive and to collect information about the degauss cycle. IRONCLAD preserves the image, degaussing cycle data, and...
USB devices) standard wall outlet. C. Connect IRONCLAD port 4 to image capturing device port F. Connect HD-3WXL power cord into port 9 and plug into 7 using HDMI cable. any standard wall outlet. IRONCLAD HD-3WXL Operator Manual 2 of 13...
Keyboard (capital letters only) Accept/Reject Image Screen • Navigation MENU: Log Out only • Hard drive image: Shows captured image • ACCEPT button: Press if image is clear • REJECT button: Press if image is blurry IRONCLAD HD-3WXL Operator Manual 3 of 13...
Page 5
ADMIN button: Takes you to the admin pages to perform admin functions. • LIST VIEW button: Takes you to the List View screen. NOTE: Only shows up if IRONCLAD is not connected to HD-3WXL. IRONCLAD HD-3WXL Operator Manual 4 of 13...
Another dialgue box appears asking “Do you want to move to the data collection process?” • Press YES to continue to processing hard drives. • Press NO if you would like to stay on this screen. IRONCLAD HD-3WXL Operator Manual 5 of 13...
Note: Some hard drives have multiple bar codes. Look for the bar code preceded by “S/N” or “Serial Number.” Most hard drives also have a scannable bar code along the bottom edge of the drive. IRONCLAD HD-3WXL Operator Manual 6 of 13...
Page 8
When the HD-3WXL has finished degaussing, the hard drive is automatically released into the IRONCLAD image capture system. • The IRONCLAD takes an image of the degaussed hard drive. • The media slide gate releases the hard drive. IRONCLAD HD-3WXL Operator Manual 7 of 13...
Page 9
Once the image is accepted, the IRONCLAD will release the hard drive down the media slide. • Place a “degaussed” label onto the degaussed hard drive. • The IRONCLAD advances to the Data Entry Screen to begin processing the next hard drive. IRONCLAD HD-3WXL Operator Manual 8 of 13...
Once the serial number appears, press the GET RECORD button to see the database record screen. Detailed Record Screen • The Detailed Record Screen displays the image with all hard drive erasure information included in the database. IRONCLAD HD-3WXL Operator Manual 9 of 13...
Page 11
• To return to the List View Screen press the BACK button. List View Screen • To return to the No Connection Screen select “Back” from the drop down MENU. IRONCLAD HD-3WXL Operator Manual 10 of 13...
IRONCLAD screen for clarity. • . Repeat Steps 2 and 3 if needed. Step 4: Image Capture Device • Remove the hard drive from media slide. • Slide the image capture device back onto the HD-3WXL IRONCLAD HD-3WXL Operator Manual 11 of 13...
• A dialog box will ask you if you want to “Shut Down Now?” • Select “Yes”. The IRONCLAD will automatically power down. • Press the POWER switch to turn off the HD-3WXL. IRONCLAD HD-3WXL Operator Manual 12 of 13...
Press the POWER button to the off (0) position on the HD-3WXL. • Manually extract hard drive from HD-3WXL. • Press the POWER button to the on (|) position on the HD-3WXL. • The IRONCLAD will advance to the data collection screen. IRONCLAD HD-3WXL Operator Manual 13 of 13...